07-16-2010 01:01 PM - editado 07-03-2021 06:59 PM
I've been having connection issues with my (2) Aironet 1310, which are setup in a bridge p2p mode. A few weeks ago we had a power outage due to a lighting storm. Well, it knocked out my non-root bridge (not connecting to the root). So I brought it back to check the configurations, but when I try to use the web console all I get is the following page:
When I click the "Web Console" link it takes me to the following page:
Is there a way to get the original web console page back?
¡Resuelto! Ir a solución.
el 07-27-2010 08:40 AM
WOW!! thats great to hear... i tot the same and that y asked u whether we reloaded the Bridge in my first post....
Anyways, it was my pleasure working with you.
Have a great day
Regards
Surendra
el 07-19-2010 01:40 AM
tried rebooting the device?? wat about the console access?
Regards
Surendra
el 07-20-2010 04:10 PM
Thanks for the reply, but no luck in the console. I tried doing the hard reset with the "erase nvram" option, but it kept telling me that it was a bad command. I finally got some soft resets done through the CLI, but still same page w/ no access to the default web console. Any Ideas would help!!!
el 07-24-2010 01:30 AM
Sorry for the delayed response.. What does the command "sh ip int br" output say from the CLI or the Console access??
Regards
Surendra
el 07-26-2010 09:08 AM
Hello Surendra,
It reads as follows:
Ineterface IP-Address OK? Method Status Protocol
BVI1 10.1.254.101 YES other up up
Dot11Radio0 unassigned YES unset administratively down down
FAstEthernet0 unassigned YES other up up
Thanks,
Daniel
el 07-26-2010 05:11 PM
are we able to get the wireless access if we configure the same with CLI??
Regards
Surendra
el 07-27-2010 08:35 AM
Okay, I got it working. I had to reload the IOS, it must have got corrupted. Again, thanks for you help.
el 07-27-2010 08:40 AM
WOW!! thats great to hear... i tot the same and that y asked u whether we reloaded the Bridge in my first post....
Anyways, it was my pleasure working with you.
Have a great day
Regards
Surendra
el 11-22-2010 12:32 PM
Hi,
Looks like i faced same problem here. May i know how to reload back the IOS, if used console, what command need to key in? Im totally new to this Cisco system. Can we do something from the web error (webpage is attach) using any command? Please help.
Thank You..
el 11-22-2010 05:15 PM
Please continue with your post.. anyways...
here is the command on the CLI..
archive download-sw / force-reload /overwrite tftp://
Lemme know how this answered your question..
Regards
Surendra
el 11-22-2010 05:59 PM
Ok,
Thank you, i will try this morning..
el 11-22-2010 06:08 PM
lemme know how the upgrade goes..and lemme know if this answered your question..
Regards
Surendra
el 11-22-2010 06:24 PM
Ok, itry my best. Thank you
On Tue, Nov 23, 2010 at 10:08 AM, surbg <
el 11-22-2010 06:24 PM
Ok, itry my best. Thank you
On Tue, Nov 23, 2010 at 10:08 AM, surbg <
el 11-23-2010 04:09 PM
Hi,
How to insert IMAGE.Tar? on my desktop, i have 2 image file for software update.c1310-k9w7-tar.124-3g.JA1 and c1310-k9w7-tar.124-21a.JA1. How to select either one? Please help.Thanks you
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros