04-25-2008 07:53 AM - edited 07-03-2021 03:46 PM
On this command which IP address do I use? ap-manager? or management?
Solved! Go to Solution.
04-25-2008 08:07 AM
It looks like you are staging an AP. I would use the management address. Someone please correct me if I am wrong this, I haven't had to do this since 3.x
04-25-2008 09:09 AM
Hi,
It should be the "WLC management IP address".
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Search for "If necessary, issue the lwapp ap controller ip address A.B.C.D" in the above link.
Hope this helps.
-> Sushil
04-25-2008 08:07 AM
It looks like you are staging an AP. I would use the management address. Someone please correct me if I am wrong this, I haven't had to do this since 3.x
04-25-2008 09:09 AM
Hi,
It should be the "WLC management IP address".
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Search for "If necessary, issue the lwapp ap controller ip address A.B.C.D" in the above link.
Hope this helps.
-> Sushil
04-25-2008 09:14 AM
Thank you both for the help! :)
04-25-2008 09:18 AM
No problem man.
-> Sushil
04-26-2014 07:39 AM
For more details check this out:
http://tejasjain1991.blogspot.in/2014_04_01_archive.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide