Solved: Re: MA-ANT-25 Antenna Not Diffusing Signal

antmich · ‎04-26-2021

Hi everyone,

I'm currently deploying MR74 APs with the MA-ANT-25 antennas (2 per AP). Whenever i try powering up the AP, it turns green but I see no SSID in the air. It is supposed to be a survey mode AP and is connected to my battery pack.

Any idea of what could be wrong ?

Thank you very much

antmich · ‎04-26-2021

Hi @Rasmus Hoffmann Birkelund !

I ended up finding what the issue was. The AP was in survey mode as expected, but for some reason the broadcasted SSID was hidden ?

I haven't found why and couldn't configure it differently, so I just kept going my survey knowing the SSID was hidden.

View solution in original post

Rasmus Hoffmann Birkelund · ‎04-26-2021

Have ensured the AP is configured in survey mode?

See here for instructions; https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points

#########
LinkedIn ::: https://blog.rhbirkelund.dk/
Like what you see? - Mark as helpful ## Did it answer your question? - Mark it as a Solution 🙂
All code examples are provided as is. Responsibility for Code execution is solely your own.

antmich · ‎04-26-2021

Hi @Rasmus Hoffmann Birkelund !

I ended up finding what the issue was. The AP was in survey mode as expected, but for some reason the broadcasted SSID was hidden ?

I haven't found why and couldn't configure it differently, so I just kept going my survey knowing the SSID was hidden.