MAC Filtering Controller Templates

[THOMAS GLASER]

hello

i have two ssids (profiles "Scanner" and "Tablet")  and one notebook  (ac:81:12:7a:4a:2d)  which should be able to join both ssids by mac filtering.

i am using "MAC Filtering Controller Templates" from NCS 1.1.1.24

when i apply the second template (notebook 2)  to the controllers  the first template is removed

Configure > Controller Template Launch Pad > Security > MAC Filtering:

Template Name      MAC Address           Profile Name       Interface       Description         Applied To Controllers      Applied To Virtual Domains

Notebook                    ac:81:12:7a:4a:2d    Scanner               management      Notebook zum Testen       0                             0

Notebook 2                 ac:81:12:7a:4a:2d    Tablet                   management      Notebook zum Testen       2                             3

how can i configure the templates that the notebook can  join both ssid´s, Scanner and Tablet?

thanks tom

[Scott Fella]

Can you post a screen shot of the template. If you per from this on the WLC, dies it work or not?

Sent from Cisco Technical Support iPhone App

[THOMAS GLASER]

hello

i tried to create a second mac-entry by commandline:

(+++- -1) config>macfilter add ac:81:12:7a:4a:2d 3 0 test
MAC filter already exists - entry not created.

(+++- -1) config>macfilter add ac:81:12:7a:4a:2d 1 0 test
MAC filter already exists - entry not created.

wlc runs 7.0.116.0 software.

do higher softwareversions support multiple macfilter entries?

greetings om

[Stephen Rodriguez · Accepted solution]

No, all code only supports one entry of the MAC address into the database.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered