06-08-2016 02:15 PM - edited 07-05-2021 05:11 AM
Ap 1832i is joining wireless controller 2504 normally. But not broadcasting ssid, another series is working properly and broadcasting except this series.
08-18-2016 11:28 PM
Hello s sa. how did you finaly solved this issue ?
i experience same one on 5508 with 1132i : no ssid broadcast
has anyone an idea ?
best Pierre
08-19-2016 12:00 AM
HI Pierre,
Please check if there is any AP groups(except default-group) on WLC. If yes then add the WLAN in the specific AP groups.
WLAN > Advanced > AP Groups
Also paste the output of : sh wlan <id>
Regards
Dont forget to rate helpful posts
08-22-2016 12:24 AM
OK,
as the aironet 18XX do no support TKIP anymore SSID with tkip isn't broadcasted...
solution : replace tkip with aes.
Best regards, Pierre
03-12-2018 12:15 AM
1. First check AP is connecte dproperly!!!
2. older then 8.3 version: TKIP was not supported. so you can try to change ssid to WPA2/AES and try again.
Regards
Dont forget to rate helpful posts
07-15-2018 06:43 AM
09-11-2018 04:58 PM
Did you check the regulatory domain of access points? i must to correspond to the country where are these located.
09-11-2018 05:01 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide