cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
496
Views
3
Helpful
2
Replies

maximum 32 AP count in 12.3(8)JEC in 12.3(8)JA there's no restriction

kre9900
Level 1
Level 1

Hi,

We've sites with 60 ap's and one ap is the wds-ap, when we've running ios 12.3(8)JA witch our ap1200's we've got for instance:

#sh wlccp wds

.....

AP Count: 59 , MN Count: 235

when we're running ios 12.3(8)JEC we're getting an AP count of 32 en the rest get the message in the log "%LEAPCL-3-TIMEOUT: AP Timed out authenticating to the WDS".

Is this made on purpose ??

Greetings,

René

2 Replies 2

jappiah
Level 1
Level 1

Rene,

We encountered the same issue when we upgraded our APs from 12.3(8)JA to 12.8(8)JEC. The solution to the problem was to configure the WDS AP with the following:

wlccp wds mode wds-only

Anyway, if you have not resolved the issue please try above command. Thanks Jojo.

Ok,

Thanks for the reply, we've solved the problem by a change to 12.3(8)JEA3.

In that version there's a maximum of 60.

Strange that there's no documentation written about this by cisco.

Review Cisco Networking for a $25 gift card