medium power 15.4 on 3rdparty injectors and switches.

[Olof Wiking]

Hi

I have a question regarding POE+. We have been using AP2702 for a while now. So far we have been using Cisco POE+ injektors and catalyst 2960S and 2960X switches with POE+ support. But now I want to try cheaper switches and cheaper powerinjectors, like HP 1910-8 POE+.

But I get a warning in the controller saying that the accesspoints is only using medium power 15.4 W.

Anyone has any idea what could be the problem? And how I can fix it?

Thanks.

[mohanak]

2700 Power Requirements

	Description	AP Functionality	PoE Budget 1 (Watts)	802.3af	E-PoE	802.3at PoE+ PWRINJ4
PoE+802.3at	2700 – Out of the Box	4x4:3 on 5G & 3x4:3 on 2.4G Auxiliary Ethernet Port enabled	16.1	Not Available	Available	Available
PoE+802.3af	2700 – Out of the Box (7.6 code)	Auxiliary Ethernet Port disabled 2x2:2 on 5G & 2x2:2 on 2.4G	15.4	Available	NA	NA
	2700 – Out of the Box (8.0.x.x code)	Auxiliary Ethernet Port disabled 3x3:3 on 5G & 3x3:3 on 2.4G	15.4	Available	NA	NA
	2700 – Out of the Box (8.0MR or 8.1)	Auxiliary Ethernet Port enabled 3x3:3 on 5G & 3x3:3 on 2.4G	15.4	Available	NA	NA

^1.This is the power required at the PSE, which is a switch or injector.

[Abhishek Abhishek]

Input power requirements	● AP2700: 44 to 57 VDC ● Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw	● AP2700: 15W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable.