Meraki APs location

[rasha.k.satu]

Hi All,

I have a project to install Meraki APs but I don't know how can i select the location for these APS. it's only one big room have 10 APs, the reason to have 10 APs because I know Meraki MR 46-HW can't handle more than 50 users in each, that was Meraki team recommendation, so I am wondering how to install these 10 APS in the same room.

[ww^]

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/High_Density_Wi-Fi_Deployments#Access_Point_Placement

You probably want to use small (different) channels and low transmit power

https://meraki.cisco.com/lib/pdf/meraki_whitepaper_large_events.pdf

[rasha.k.satu]

Thank you, i couldn't to find in the links what is the recommended distance between APs during the installation, or how many meters among the APS. Any ideas?

[EdwinValladares]

it will depend on the wifi expert run over the property using some tools to measure the RF, try using a heat map app to measure the room, coverage per AP

[Karsten Iwen]

Do you already have the APs? This seems to be a good fit for APs with external antennas that give you more focus.

My recommendation: Let someone specialised in Wireless do a proper WLAN-Design.

[rasha.k.satu]

Do you mean if we used external Antenna we will get more clients connectivity? are you talking about the same model or a different model of APs?

[Karsten Iwen · Accepted solution]

External antennas don't get you more clients connected. But with the right antenna you can make sure that the signal is only strong in a particular area of the room and not "everywhere" (depending on the size of the room), The AP would be an MR46E instead of the "normal" MR46.

Did you go through the link for High-Density design that @jdb1 provided?

[rasha.k.satu]

yes i did go through the link , we need to install Meraki Aps in cafeteria all open area no racks no walls nothing, everything is straight and we have about 1000 users need to connect to to Meraki so we have 20Merakis Aps. so i need to know how to install these APs what is the suitable distance between each Ap should be. it MR46-HW not MR46E.

[chrisgw]

Hello Meraki Community,

Are you tired of the time-consuming process of network planning and deployment? Are you struggling to maintain accurate and up-to-date information about APs locations? Solve these issues of Day 0 to Day N deployments with AP Auto Locate.

We are seeking participants capable of implementing this feature for large-scale networks that have 8+ compatible APs on a floor plan to work with and provide valuable feedback to the Cisco Wireless product team. This adoption insight will help us refine AP Auto Locate and make it even better!

If interested, please sign up using the link below to onboard yourself to the Stomio project for feature testing. Based on your network characteristics, we will contact you to gather information on your experience.

https://app.stomio.io/opt-in/SU6gQ_4TyCEA6M9ScvFCl57qtPhpW-MpjK3GFnXUqltY9UnuqN8cCSlwhWD36R0sOwwx60R...

Key Benefits of AP Auto Locate:

• Save Time & Reduce Complexity: Automatically determine and place AP locations on floor plans with ease.
• Enhance Network Performance: Ensure accurate, up-to-date AP locations for optimal client device location accuracy.
• Adaptable Solutions: Use GNSS when available, or place a few manual anchors per floor if GNSS is inaccessible.
• Compatible with Leading Hardware: Supported on a range of models, including MR78, MR36H, MR36, MR46, MR56, MR57 (GPS capable), CW9162 (GPS capable), CW9164 (GPS capable), and CW9166 (GPS capable).

Firmware Compatibility:

• MR31+

We appreciate your support and look forward to your participation!