05-21-2024 08:19 AM
We have several P2P bridges connecting buildings between 50-700 feet apart (usually line of sight). We're currently using a mix of EOL Ruckus bridges and some Ubiquiti bridges. I found that I can do meshing with 9124's via our 9800 controller. I really like the idea of having these centrally managed, patched, etc. However, I cannot find good documentation on the range, power, etc. for any 9100 AP in bridging mode. If anything would work over this distance I'd get whatever AP model would work even if it's bigger than the 9124.
05-21-2024 10:16 AM
- Ref : https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2024/pdf/IBOEWN-2000.pdf
Start reading from : Rate & Range Testing - 9124
M.
05-21-2024 10:26 PM
Here is the Mesh deployment guide with 9800. It should help with the configuration side of work.
https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215100-join-mesh-aps-to-catalyst-9800-wireless.html
HTH
Rasika
**** Pls rate all useful responses ****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide