02-20-2013 09:48 AM - edited 07-03-2021 11:35 PM
I have been searching through the cisco docs for a while and i just cant seem to find this info. Can I run aironet 1600's with my wism running 7.0.116? Also, could I run my 1130 series ap's with a wism2? Basically, what is the minimum code level for a lightweight 1600, and what is the maximum code level for a lightweight 1130?
Solved! Go to Solution.
02-20-2013 09:53 AM
For the 1600 to work you need to be running 7.4 code. Per the release notes 7.4 will support both AP models you have
http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn74.html
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
02-20-2013 09:53 AM
For the 1600 to work you need to be running 7.4 code. Per the release notes 7.4 will support both AP models you have
http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn74.html
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
02-20-2013 10:08 AM
awesome, thanks!
03-06-2013 01:46 AM
Hello,
Hope you are doing good,
I am totally agree with Stephen.
For both AP 1600 and 1130 you need to be running 7.4 code.
For more reference you can visit the below link
http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn74.html
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide