Missing AP's in NCS Prime

[Jerry Gengler]

When looking at the WLC directly, I see 15 Access Points, if I view it from within NCS Prime, I only see 7.

Has anyone experienced this and/or thoughts? 

I've re-synced the controller several times.  Removed from Prime and re-added.  Nothing I have tried has resolved this issue.
 

[Sandeep Choudhary]

is WLC and NCS version are compatible ?

Chekc this:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Regards

Don't forget to rate helpful posts

[Jerry Gengler]

Prime version 2.0 and WLC 7.6.130.0 are not compatible.  Odd in that it shows any at all.  I found that after the post.  Again, just odd that it shows any if not compatible.

Thanks.

[ramkris2]

Correct. WLC 7.6 requires atleast PI 2.1. To get all the bug fixes, I would suggest PI 2.2 + 2.2.2 patch which would also support all WLC 7.6 till the latest