Mobility Express - add device air-cap1602i without web gui

[Welcome2008]

Hi,

Since the web GUI does not work (empty response), is the web gui required to add another air-cap1602i device? or does it all happen automatically?

I can log in safely via ssh.

Thanks

[Flavio Miranda]

Onboarding of AP on the WLC is automatic since both has connectivity. But, onde joined, you need to configure it accordingly.

You can refer to the command line manual:

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/83/cmd-ref/me_cr_book/me_wlan_cli.html 

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/83/cmd-ref/me_cr_book/me_controller_cli.html 

[balaji.bandi]

web GUI does not work (empty response),

This need to investgate why GUI not working, second can be done vial CLI, but GUI is easy to setup and monitor

what AP running ME here ? what version ?

[Welcome2008]

I have already request this on 

https://community.cisco.com/t5/wireless/web-gui-not-show-cisco-mobility-express-aironet-1850-series/m-p/4581812#M240214

thank you for interesting.

[Welcome2008]

System Inventory
NAME: "Mobility Express" , DESCR: "Cisco Aironet 1850 Series Mobility Express"
PID: AIR-AP1852E-E-K9, VID: V03, SN: KWCXXXXXXXXXX

Burned-in MAC Address............................ 00:XX:XX:XX:XX:E0
Maximum number of APs supported.................. 50
Press Enter to continue or <ctrl-z> to abort


System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.5.131.0

System Name...................................... ap230
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2250
IP Address....................................... 192.168.XXX.XXX
Last Reset....................................... 0: unknown

what can i do to restore the web gui?