cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
195
Views
0
Helpful
1
Replies

Mobility Express Issue

SergioJ
Beginner
Beginner

Hi, I have two Cisco 1815i AP's running ME for redundancy. Both are connected to trunk ports on a L3 switch with the following configuration on the switch side:

switchport trunk encapsulation dot1q
switchport trunk native vlan 3
switchport trunk allowed vlan 3-10
switchport mode trunk
switchport nonegotiate
spanning-tree portfast trunk

Both APs are running the ME image and one of them is set as the primary controller and preferred master and the other one is set for AP only. The problem I'm having is if both AP's are powered on, I'm able to login to the web management page but the page doesn't load completely and I cannot manage the APs. However, if I power down one of the APs, I'm able to login and manage the APs just fine. Any idea as to why this is happening?

1 Reply 1
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: