Mobility Express Question

[Michael Huffman]

Real quick,

This is the first deployment I will be doing with the Mobility Express.
Do I need the Mobility Express software an all the AP's in the network, or Just 1 to act as the controller ?
It's a small network with 4 AP's using the AIR-AP3802E model.

[Rasika Nayanajith · Accepted solution]

It require only in Master AP that you are going to use as WLC. If you want to have redundancy ,then you can load ME image on two APs.

Other APs, you can leave as CAPWAP.

HTH

Rasika

*** Pls rate all useful responses ***

[Michael Huffman]

Thank you. This is what I assumed, but it's good to have confirmation.