Hi allWe have a guest with the following settings:- Network access: open- Splashe page: Sign-on with SMS AuthenticationWe noticed that clients can log in without sms authentication even though it is enabled.There is also no splash page. At the detail...
Hello, Does anyone know why my access point 3802i showing this message when booting BootROM - 1.78Booting from SPI flash, Secure modeBootROM: RSA Public key verification PASSEDBootROM: CSK block signature verification PASSEDBootROM: Boot header signa...
we have a wlc 5508 and lwap 1142lwap 1142 have join wlc 5508 with ver AIR-CT5500-K9-7-0-116-0I upgrade wlc version AIR-CT5500-K9-7-0-220-0and lwap no long join wlc, on wlc debug I get: Discovery Request received on wrong VLAN '114' on interface '13'...
Hi all,we have 1200 series autonomous Ap. we have to integtrat acs 4.1 server with open ldap 3.0 for external database authentication for wireless user .how to integrate it.
With Jacob Ideji, Richard Hamby and Raphael Ohaemenyi Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the new Identity Solutions Engine (ISE) and Wireless LAN Controller...
I'm trying to put in a new wireless solution for a client with an outdoor dock.The area of coverage that we are trying to support is approximately 40m x 100m.Both Marine Vessels and the open building will need to be able to reach the signal.I'm think...
I have a couple extra Aironet cap-1604i-a-k9's just sitting around and I needed to setup wifi at a different site. So I wondered if this unit can be used stand alone or if it has to be used with a controller?
My customer is decommissioning several hundred AP's and is looking for an efficient way to reset the configurations back to the factory default erasing any saved passwords or other proprietary information. Has anyone developed a process that can hel...
Hi after configuring Mobility Express using over the air setup wizard, I can not open the web page of the controller, the ping answer and I can enter via ssh but if I try to open via a web browser it don´t work. The ME version is 8.2.15. If I configu...
Dears, I have a point to point wireless link of 7Mbps to my DR which is 5 km away, when I transfer a 5GB file on this point to point link it never gets succeed, it stop in between by some error , when the copy is going on the bandwidth get fully util...
I seem to recall that the PI team was working on getting more timely updates for the PSIRT and EoL reports into Prime Infrastructure but I am having trouble finding it. Do we have a way to update the database yet?
Hello to the Community, I'm facing a problem trying to establish a wireless mesh between two APs. The BGN is identical between this two APs, backhaul is on the same radio (5GHz), and channel is identical (140). The root AP receives update from its ch...
I was wondering if anyone has an algorithm to determine the optimal power levels based for a specific distance for the Cisco Aironet 3702i and 3705i. The reason I ask is we have a client who gives away free wifi at their 100s of stores on the high ...
Hi Team , When my clients connect to 802.11AN , they are working fine but when they connect to 802.11BN and I ping them , they show high latency and ping drop.
I have a production 2504 WLC that I have been asked to upgrade from 7.0.240.0 to 7.4.121.0. According to the Release Notes for Cisco Unified Wireless Network Field Upgrade Software, Release 1.8.0.0, the FUS 1.8.0.0 must be installed to used certain f...
