cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
499
Views
5
Helpful
2
Replies

Mobility Express Question

Michael Huffman
Beginner
Beginner

Real quick,

This is the first deployment I will be doing with the Mobility Express.
Do I need the Mobility Express software an all the AP's in the network, or Just 1 to act as the controller ?
It's a small network with 4 AP's using the AIR-AP3802E model.

1 Accepted Solution

Accepted Solutions

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

It require only in Master AP that you are going to use as WLC. If you want to have redundancy ,then you can load ME image on two APs.

 

Other APs, you can leave as CAPWAP.

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 Replies 2

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

It require only in Master AP that you are going to use as WLC. If you want to have redundancy ,then you can load ME image on two APs.

 

Other APs, you can leave as CAPWAP.

 

HTH

Rasika

*** Pls rate all useful responses ***

Thank you. This is what I assumed, but it's good to have confirmation.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: