Mobility express - Roaming

[3xIT]

Hi all,

We have problems with roaming on Mobility Express (version 8.4.x). Currently, we have 10 AP - 3802i and two of them are WLC (another one as backup).

After connecting to one AP, we are connected to that one until we lose signal and then our device (iPhone or Microsoft Surface Book) connects to the first AP. It's really frustrating when you walk around and example have a video chat that brakes because of this roaming problem.

We made only simple setup, there is no special configuration beside we have different VLANs for different networks (currently we have four networks - tree WIFI SSID and one for local computers). Our router RV325 is doing all VLAN and DHCP things.

Thank you for your help in advance!

[patoberli]

The bad signal could also be because of wider channels (80 or 160 Mhz compared to 20 or 40 on the 1142) or because of some weird bug.

I try to have always at least -70 dB signal strength in the locations where people are. Measured with an average mobile phone (to be more realistic).