Mobility groups between WLC 2106 & 5500

[patriciasimo]

Can I configure a mobility groups between 2106  Wireless LAN Controller and 5500 Wireless LAN Controllers?

Thanks.

[Scott Fella]

Yes you can. Remember that the 2106 can't be an anchor though.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here is a link that should help

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp102617

Sent from Cisco Technical Support iPhone App

[patriciasimo]

Thank you!!

[Scott Fella]

No problem...

Sent from Cisco Technical Support iPhone App

[Amjad Abdullah · Accepted solution]

Patricia,

Please mark the discussion as "Answered".

Regards,

Amjad

Rating useful replies is more useful than saying "Thank you"

[patriciasimo]

It was my first question on this forum. Can you remind me please how to mark it as answered?

[Amjad Abdullah]

Hi Patricia:

Welcome to the forums then.
Actually Scott's answer was the correct one. Not mine. So just to appreciate Scott's efforts (Thanks Scott) try please to mark his answer as the correct answer. Just below his answer there is a button to mark it as correct answer.

Come back soon.

Amjad

Rating useful replies is more useful than saying "Thank you"

[George Stefanick]

Pat,

Do you plan on anchoring a controller in the DMZ? If you are you should consider putting the anchor in a different mob group to limit the amount and unneeded mobility mesaages getting sent to the DMZ.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin