cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
430
Views
0
Helpful
2
Replies

Mobility Groups

tmeade5622
Beginner
Beginner

Can you have controllers on dissimilar versions of code in the same mobility group?

For example 3 controllers on 7.0.116.0 and 1 controller on 7.0.220.0.

1 Accepted Solution

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

Yes, that should work just fine. But you are best served by having all WLC in the mobility group on the same code.

Do keep in mind, that if your APs fail over to a WLC on a different code that they will need to download code and reboot prior to being able to service clients.

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

2 Replies 2

Stephen Rodriguez
Cisco Employee
Cisco Employee

Yes, that should work just fine. But you are best served by having all WLC in the mobility group on the same code.

Do keep in mind, that if your APs fail over to a WLC on a different code that they will need to download code and reboot prior to being able to service clients.

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: