Wireless

Looks like my 5508 WLC came with base license of 25 ap's and I need to exceed that.Is this something I can purchase thru Cisco indirectly thru a vendor ?Do I need a license to exceed the 25 ap's ?CheersDave

Hi,I just plug my new Cisco Aironet 1140 with the appropriate CISCO power supply (no PoE here) but I cannot access it.I can see it's IP adress on my DHCP, I am able to ping it, but when I try to access to the web-browser interface, I receive an error...

Hi,I havijng problems with cisco asa 5520. here is the setup. The asa has an inside, outside and dmz interface (dmz has sub interface and trunked to a dmz swtch- cisco 3750 - layer 2 only ) connected to the dmz firewall. the dmz has a mgmt address of...

Hello-I am replacing wireless for a local hotel. It is a 2 story building in a L shape, about 120 rooms. All cat5e cables have been tested and certified. I installed a 302-08P switch in the MDF and IDF and are uplinked via copper/gig ports. I am repl...

Hi guys, I was just wondering if anyone can help me out with what seems to be a common issue/query regarding getting AppleTV to work via the Wireless Lan Controller.. We are running WCS 7.0.172.0, our WISM controllers are on software version 7.0.116....

Hello,I am trying to get this officeextend working.I connected the ap and checked the H-Reap box and then officeextend and gave it a public ip. This public ip is NAT'd to the dmz controller on the firewall. (The dmz controller is 5508 running code 6....

How can I have access to the cisco "AP#" prompt?When I try to acees the AP through hyperterminal, it gives me the attached messages. The message keeps looping and not letting me access the AP# command prompt to assign an IP address so that I can cont...

Hi allI have a 4404 WLC with 50 access points on it. I have just setup a new 5508 WLC, I want to move each AP one by one to my new controller. My controllers have different versions of code so I cant add the mobility group. Can I change under each ac...

Hello,We have an AiroNet 1140 AP that we are trying to configure RADIUS authentication. Our RADIUS server is a Microsoft Windows Server 2008 NPS server. Unfortunately, our Wi-Fi clients are unable to authenticate. We appear to have everything configu...

We have are having trouble with iPads and iPhones connecting to the wireless networks controlled by our WCS.  Sometimes they connect without issue, but other times we have to retry anywhere between 10 and 30 times to get them to connect.  There are m...

Hello,Is anyone aware of a way, "except for not broadcasting the SSID", to prevent clients from Inadvertently obtaining an IP address on a guest wireless network?We are using two pair of 5508's for anchor controllers, and we're close to reaching our ...

I am currently using a 5508 controller with 25 1142N AP's, I am using one WLAN with LDAP authentication against our dc's and one WLAN is open with guest access only. All is working well.My question is can I create a 3rd WLAN using the the same authen...