Mobility Work Center in Prime Infrastructure 2.0

[vramanaiah]

Hi,

I know Mobility Work Center(MWC) could be used to configure Mobility Domains, SPGs, etc., and deploy them onto controllers.. but i am wondering how does it work in the following scenarios..

a) The devices discovered already have Mobility configuration in them.. Will the MWC reflect those settings.. 

b) Even if all the mobility settings were configured via MWC, if the user changes some settings directly on the devices, would MWC reflect that change automatically or is there any synchronization process that one has go through..?

[Rasika Nayanajith]

Here are good references for converged access switch configuration via Prime.

http://wirelessonthego.postach.io/post/cisco-prime-infrastructure-workflows-for-converged-access-single-switch-branch-network-workflow

http://wirelessonthego.postach.io/post/best-practices-and-golden-configs-converged-access-branch-deployment

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/mobility/configuration_guide/b_mobility_3e_3850_cg/configuring_mobility.html#d25e1720a1635

HTH

Rasika

*** pls rate all useful responses ***