Model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

[Ibrahim Jamil]

Hello International friends

what is the model number of the power adapter for Cisco access point CAP3502I-A-K9 ,

I m surprised that power adapter of Cisco ip phone ( CP-PWR-CUBE-3)  able to power this Access point

your input is very much appreciated

thanks a lot

Ibrahim jamil

[Sandeep Choudhary]

As per datasheet: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/data_sheet_c78-594630.html

Local power supply is:

Cisco AP3500 Local Power Supply (AIR-PWR-B=)

Regards

Dont forget to arte helpful posts

[Flavio Miranda]

Hi 

This is the Cisco AIR-PWRINJ5. As long as a power adapter fill the requirements it will work.

https://www.cisco.com/c/en/us/td/docs/wireless/power/quick/guide/pwrinj5.html

-If I helped you somehow, please, rate it as useful.-

 

[Ibrahim Jamil]

Hello flavio

this link y provide  is a power injector for non-PoE switch

thanks

[Ibrahim Jamil]

guys

why and how the power adapter of cisco IP Phone power this AP 3500??

THANKS

[Sandeep Choudhary · Accepted solution]

Hi,

CP-PWR-CUBE-3= power supply for Cisco IP phones.

- Input voltage: 100V - 240V AC
- Max. input power: 5A

Input Power Requirements for 3502 AP:
• AP3500: 44 to 57 VDC
• Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

as you can see in above power requirement ...whcih supports both thats the reason it working with AP as well.

It will work for 3502 AP but if cisco dont recommand it then dont use it.

Regards

Dont forget to rate helpful posts

[Ibrahim Jamil]

Hello sandeep

pls find attached power adapter specs

thanks

[Sandeep Choudhary · Accepted solution]

yes i can see it.

Again it will work for 3502 but no one give you a 100% surety.

Best is to have the real power supply for 3502 AP as per cisco recommandation in data sheet.

Regards

Dont forget to rate helpful posts

[Ibrahim Jamil]

thanks for u time guys to clarify my concern by responding quickly to this thread