03-28-2017 05:34 AM - edited 07-05-2021 06:45 AM
Hello community!
I need to know how to monitor wireless packets as I do to monitor my wired network with Wireshark. I have to see all the packets on an SSID, but when I use Wireshark on my wireless card I can only see the packets that are crossing my wireless card (packets that go from and to my ip address).
Thank you,
Solved! Go to Solution.
03-28-2017 06:34 AM
You need a wireless sniffer like The NetScout OneTouch, Omnipeek, AirMagnet Laptop Analyzer or a MacBook or Linux machine. Even a Cisco AP can sniff the air. Take a look at this link as it can help:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/80211/200527-Fundamentals-of-802-11-Wireless-Sniffing.html
-Scott
*** Please rate helpful posts ***
03-28-2017 06:34 AM
You need a wireless sniffer like The NetScout OneTouch, Omnipeek, AirMagnet Laptop Analyzer or a MacBook or Linux machine. Even a Cisco AP can sniff the air. Take a look at this link as it can help:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/80211/200527-Fundamentals-of-802-11-Wireless-Sniffing.html
-Scott
*** Please rate helpful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide