MS-PEAP with windows zero configuration problem

[ccr_cisco]

Hello,

Here is my configuration

1130 AP, WLSE Express (radius)

authentication : PEAP with ms-chapv2

My user database is on the WLSE.

MS-Peap works fine with my intel pro/wireless client but always failed with the integrated WZC client on XP SP2. I already patch it with KB885453 but this doesn't help.

Is there some specials parameters on the radius to make it works with WZC ?

Thanks for your help

[robert.wright]

review your log files, you may not have the client configured correctly... Possibly set the wrong certificate.

[mattgraham]

Untick the option to verify certificate in the windows config. PEAP is server side, client can ignore it. Also, check if you are trying to use windows initial login - if so, machine authentication must be enabled.

Hope that helps.

[k.rouwette]

I have the same problem with the integrated WZC client on XP SP2. The intel pro/wireless client works fine. You have know any solutions?

[ccr_cisco]

Hi,

Yes I found the solution.

WZC is not CCX compatible so you have to disable or make optional cckm on the APs with this command :

authen key-manage cckm optional

Bye