03-11-2013 09:34 PM - edited 07-03-2021 11:43 PM
I have a WLC on SRE 7.4 code I need to have two ssid's One is more for a guest on one subnet and a second SSID for employees. I am getting different answers so I am looking for best way to do it.
Thanks
Solved! Go to Solution.
03-11-2013 09:43 PM
You can start by creating TWO dynamic interfaces. For the sake of example, let's call one as STAFF and the other as GUEST.
Next you go to the WLAN and create two SSIDs. The guest SSID will be linked to the GUEST interface and the staff SSID will be linked to the STAFF dynamic interface.
In your switch port, make sure you allow the VLANs for your GUEST and STAFF dynamic interface VLANs.
03-11-2013 09:43 PM
You can start by creating TWO dynamic interfaces. For the sake of example, let's call one as STAFF and the other as GUEST.
Next you go to the WLAN and create two SSIDs. The guest SSID will be linked to the GUEST interface and the staff SSID will be linked to the STAFF dynamic interface.
In your switch port, make sure you allow the VLANs for your GUEST and STAFF dynamic interface VLANs.
03-11-2013 10:09 PM
Awesome thanks for quick reply. I will try it.. They want to use WAP on the internal on guest open.
Thanks again..
03-11-2013 10:20 PM
I hope your rating was a 5 if not how do i fix
03-12-2013 05:02 PM
No problem Mike. The ratings are OK and very welcome.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide