03-18-2013 02:31 PM - edited 07-03-2021 11:45 PM
Hi experts,
I can't see the dynamic interface for the WLAN that I am trying to create. The dynamic interfaces are manually configured on the controllers, not via NCS. Is there a way to let them show in the dropdown list? Do I need to create the interface and/or the interface group through the NCS as well to let them shown?
Thanks!
Difan
Solved! Go to Solution.
03-18-2013 07:04 PM
Take a look at this link as it should help.
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1075746
Sent from Cisco Technical Support iPhone App
03-18-2013 07:04 PM
Take a look at this link as it should help.
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1075746
Sent from Cisco Technical Support iPhone App
03-19-2013 12:52 PM
Thank you scott as always
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: