cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8162
Views
2
Helpful
4
Replies

Need firmware air-ap1142n-a-k9

kscheuring
Level 1
Level 1

If I am posting this in the wrong place, my apologies as I am new here.  I had someone give me an AIR-AP1142N-A-K9 but it is in lightweight mode.  I need to be able to change it to autonomous mode to be able to learn with it but the firmware for this seems to be non-existent.  Since it is EOL, Cisco will not send me the firmware.  Would anyone happen to have this firmware that you can send me?  Thank you for any help.

1 Accepted Solution

Accepted Solutions

You need to have one valid contract. It does not have to be related to this Access Point.

But yes, it seems this AP is not available to download anymore.Unfortunatelly I think you need another AP.

 

View solution in original post

4 Replies 4

Hi

 Cisco dont need to send you the firmware, which they dont do as far as i know. What you need to do is download the firmware from cisco site. And this is the link from where you can.

https://software.cisco.com/download/home/284366503/type/284180979/release/15.3.3-JC 

People dont provide software around here. Not allowed.

When I followed the link, I took me to the page but when I tried to download it, I was prompted to login and enter my contract number. Can't get a contract as its end of life and the link was for a different model access point. Any other suggestions?

You need to have one valid contract. It does not have to be related to this Access Point.

But yes, it seems this AP is not available to download anymore.Unfortunatelly I think you need another AP.

 

Rich R
VIP
VIP

1140 series is well past end of support so Cisco no longer provide software for it:
https://www.cisco.com/c/en/us/obsolete/wireless/cisco-aironet-1140-series.html
If you know the name of the file you want then you can search for it.

Review Cisco Networking for a $25 gift card