need help trying to configure 2504 WLC with SG300 and 1602 AP. AP is not getting connected and to configure SSID with TKIP

[eash]

I am trying to trying to configure 2504 WLC with SG300 28P switch. The AP are 1602E. AP is not getting connected although I am able the DHCP ip address assigned and need to configure SSID with TKIP authentication.

[Leo Laohoo]

Post the following CLI command outputs: 

1.  WLC:  sh sysinfo;

2.  WLC:  sh time; 

3.  AP:  sh version; 

4.  AP:  sh ip interface brief; and 

5.  AP:  sh inventory