08-18-2015 08:52 PM - edited 07-05-2021 03:48 AM
Hi Everyone,
Client PC is not getting IP address.
AP----Layer 2 Switch -------ASA(DHCP server)
AP and WLC are connected to same layer 2 switch.
Client can connect to WLC interface but gets no ip address.
ASA is acting as DHCP server.
AP is assigned static IP.
Gateway of AP and WLC is ASA.
I have attached debug from WLC.
Seems there is DHCP packet drop.
Regards
Mahesh
Solved! Go to Solution.
08-18-2015 11:06 PM
Hi Mahesh,
1. Did you put the DHCP IP address in interface configuration of WLC ?
if yes then Can you try to disable DHCP proxy and try again:
How to disable :
Controller > Advanced > DHCP and uncheck the Enable DHCP proxy box.
Regards
Don't forget to rate helpful posts
08-19-2015 10:05 PM
Hi Mahesh,
dont remove anything from AP manager interface.
here is the post from my blog on DHCP with WLC.
https://rscciew.wordpress.com/2014/07/16/dhcp-with-the-wlc/
hope it helps.
Regards
Dont forget to rate helpful posts
08-18-2015 11:06 PM
Hi Mahesh,
1. Did you put the DHCP IP address in interface configuration of WLC ?
if yes then Can you try to disable DHCP proxy and try again:
How to disable :
Controller > Advanced > DHCP and uncheck the Enable DHCP proxy box.
Regards
Don't forget to rate helpful posts
08-19-2015 10:48 AM
Hi Sandeep,
I will check that and will disable it if needed.
Will test later today and put new debug logs
Regards
MAhesh
08-19-2015 05:58 PM
Hi Sandeep,
Yes there was DHCP IP address under AP Manager interface.
Also Proxy was enabled.
I only disabled the proxy and after that PC was getting IP address from ASA.
Should I remove DHCP server ip address from AP Manager interface?
Can you please explain me how proxy was not stopping the PC to get ip address from ASA?
Regards
Mahesh
08-19-2015 10:05 PM
Hi Mahesh,
dont remove anything from AP manager interface.
here is the post from my blog on DHCP with WLC.
https://rscciew.wordpress.com/2014/07/16/dhcp-with-the-wlc/
hope it helps.
Regards
Dont forget to rate helpful posts
08-20-2015 07:28 AM
That is great post
Regards
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide