03-13-2016 11:59 PM - edited 07-05-2021 04:46 AM
Hi,
Can anyone shed some more light on the two different record types on the WLC? Im running a ipv4_client_app_flow_record-type now, and its working fine in CPI - but would the src-dst-ip give me more/less? Could i see what hosts each client is talking to through that record type? Not much information to be found in the doc.
Br,
Trond
Solved! Go to Solution.
03-14-2016 07:50 PM
Here is some information that I found testing this on 7.4 code (may be bit old for you)
http://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/
From 8.2 code onward in certain type of platforms (5520/8540) you will able to get standard netflow v9 support. See below Ciscolive presentation for more detail
BRKEWN-2010 - Design & Deployment of Enterprise WLAN, Melbourne 2016 March
HTH
Rasika
*** Pls rate all useful responses ***
03-14-2016 07:50 PM
Here is some information that I found testing this on 7.4 code (may be bit old for you)
http://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/
From 8.2 code onward in certain type of platforms (5520/8540) you will able to get standard netflow v9 support. See below Ciscolive presentation for more detail
BRKEWN-2010 - Design & Deployment of Enterprise WLAN, Melbourne 2016 March
HTH
Rasika
*** Pls rate all useful responses ***
03-14-2016 11:26 PM
Thanks for the info! :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide