Network computers not showing up

[Eric Kemsley]

Cisco 2504 wlc, 1142n ap, windows radius server.

When I click on Network, the only computer that shows up is mine. If I am hardwired then everything shows up (Servers, other workstations). Is this a problem with the radius server or something on the controller?

TIA,

Eric

[Stephen Rodriguez · Accepted solution]

On the WLC, make sure that you have broadcast forwarding enabled.  Should be Contrller > General tab

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Eric Kemsley]

Thanks! That did the trick.