06-17-2019 05:05 AM - edited 07-05-2021 10:34 AM
Hello
my work that i have 4 acces point 1815 and we would to work in mesh mode
so my question .
if they not support mode mesh so it client wirless can connect with them withou problem ??
how does the traffic work between acces point MAP ???
how long distance betwenn AP MAP ??
thanks
Solved! Go to Solution.
06-17-2019 05:27 AM
Hi,
1. As i said earlier, 1800 series AP dont support mesh mode means it will not work as MAP.
2. In a Cisco wireless backhaul network, traffic can be bridged between MAPs and RAPs. This traffic can be from wired devices that are being bridged by the wireless mesh or CAPWAP traffic from the mesh access points. This traffic is always AES encrypted when it crosses a wireless mesh link such as a wireless backhaul.
3. More info about distance, check this guide:
Regards
Dont forget to rate helpful posts
06-17-2019 06:25 AM
Please read this guide:
Here are the list of Indooe and outdoor Mesh APs:
Cisco Indoor Mesh Access Points
Cisco Aironet 1600 Series Access Points
Cisco Aironet 1700 Series Access Points
Cisco Aironet 2600 Series Access Points
Cisco Aironet 2700 Series Access Points
Cisco Aironet 3500 Series Access Points
Cisco Aironet 3600 Series Access Points
Cisco Aironet 3700 Series Access Points
Cisco Aironet 1530 Series Access Points
Cisco Aironet 1540 Series Access Points
Cisco Aironet 1550 Series Access Points
Cisco Aironet 1560 Series Access Points
Cisco Aironet 1570 Series Access Points
Cisco Industrial Wireless 3700 Series Access Points
Cisco outdoor mesh access points comprise of the Cisco Aironet 1500 series access points. The 1500 series includes 1572 11ac outdoor access points, 1552 and 1532 11n outdoor mesh access points, and the newer 1540 and 1560 11ac wave 2 series..
Regards
Dont forget to rate helpful posts
06-17-2019 07:06 AM
06-17-2019 05:12 AM
As per my knowledge 1800 series dont support mode. May be in future it will but not at the moment.
Regards
dont forget to rate helpful posts
06-17-2019 05:14 AM
NO !my question on suppose we work with 1815 so i have three question !!
if they not support mode mesh so it client wirless can connect with them withou problem ??
how does the traffic work between acces point MAP ???
how long distance betwenn AP MAP ??
06-17-2019 05:27 AM
Hi,
1. As i said earlier, 1800 series AP dont support mesh mode means it will not work as MAP.
2. In a Cisco wireless backhaul network, traffic can be bridged between MAPs and RAPs. This traffic can be from wired devices that are being bridged by the wireless mesh or CAPWAP traffic from the mesh access points. This traffic is always AES encrypted when it crosses a wireless mesh link such as a wireless backhaul.
3. More info about distance, check this guide:
Regards
Dont forget to rate helpful posts
06-17-2019 05:53 AM
i have three acces point MAP newtork wirless with them and not bridge with them !!
So witch acces point MAP that client wirless connected with !! last MAP or first MAP !!
and witch mode acces point MAP !!??
thanks in adavnce
i need reference please
06-17-2019 06:19 AM
i have three acces point MAP WIRLESS not MAP bridge
so my question
when client move from AP to AP map , witch acces point MAP first to connect !!
witch mode AP to be nework mesh wirless AP to wirless AP and not acces point MAP bridge to bridge
thanks
06-17-2019 06:25 AM
Please read this guide:
Here are the list of Indooe and outdoor Mesh APs:
Cisco Indoor Mesh Access Points
Cisco Aironet 1600 Series Access Points
Cisco Aironet 1700 Series Access Points
Cisco Aironet 2600 Series Access Points
Cisco Aironet 2700 Series Access Points
Cisco Aironet 3500 Series Access Points
Cisco Aironet 3600 Series Access Points
Cisco Aironet 3700 Series Access Points
Cisco Aironet 1530 Series Access Points
Cisco Aironet 1540 Series Access Points
Cisco Aironet 1550 Series Access Points
Cisco Aironet 1560 Series Access Points
Cisco Aironet 1570 Series Access Points
Cisco Industrial Wireless 3700 Series Access Points
Cisco outdoor mesh access points comprise of the Cisco Aironet 1500 series access points. The 1500 series includes 1572 11ac outdoor access points, 1552 and 1532 11n outdoor mesh access points, and the newer 1540 and 1560 11ac wave 2 series..
Regards
Dont forget to rate helpful posts
06-17-2019 06:39 AM
you don't unterstand ly question
===> witch mode that i configured in acces point MAP to be nework mesh !!??
so , when client move from MAP to MAP , my question what is access point MAP that client connect first !!
06-17-2019 07:06 AM
06-17-2019 10:18 PM
Hello
Topology mesh
the three ap map are moved to a mountain place and a single ap RAP in an adminstration !!
so that is we make toplogy mesh acces point
we are more person connected in mountain place
So , if we have ap model 1500 in moutain place SO , client can connectet with connection wirless through model AP 1500 !!?,
06-17-2019 10:19 PM
Hello
Topology mesh
the three ap map are moved to a mountain place and a single ap RAP in an adminstration !!
so that is we make toplogy mesh acces point
we are more person connected in mountain place
So , if we have ap model 1500 in moutain place SO , client can connectet with connection wirless through model AP 1500 !!?,
06-17-2019 10:28 PM
yes client will connect to MAP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide