03-25-2022 03:43 PM - edited 10-19-2023 01:09 PM
So I am new to WLC.
We have a DATA wifi SSID that is auth on external Win RADIUS. How do I associate new wireless clients with vlan x where our clients reside? The native vlan is xx and trunked on the switch port side. I understand that there could be a policy or tag configuration?
03-25-2022 06:05 PM - edited 03-25-2022 06:30 PM
Considering this is centralized deployment and you have all your routing and switching in place.
create a policy profile with vlan 1 and map the ssid to policy profile in policy tag and assign the tag to the AP.
OR
You can On your radius server configure dynamic vlan assignment of 1 as part of authorization, so when wireless connect and authenticate as part of authorization they will be pushed into vlan 1.
03-25-2022 11:58 PM
- Whilst you are add and or following advice from other post , you can always have a thorough check , of the 9800-configuration (afterwards) with (CLI) show tech wireless , have the output processed by : https://cway.cisco.com/tools/WirelessAnalyzer/
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide