Whenever I upgrade one of our autonomous 1232AG APs, I lose the ability to https to the device for the managment utility. I can SSH to it and if I turn off http secure-server and enable http server, I can use http to manage it no problem. Here's what I've done:
archive download-sw /overwrite /reload tftp://192.168.1.2/c1200-k9w7-tar.123-8.JEC.tar
Here's what I've tried:
no ip http server
ip http secure-server
<still no https:>
-------
no ip http secure-server
ip http server
<after these two commands http works fine>
crypto ken generate rsa <1024>
AP# dir flash:c1200-k9w7-mx.123-8.JEC
Directory of flash:/c1200-k9w7-mx.123-8.JEC/
7 drwx 64 Mar 02 2002 00:07:20 +00:00 html
151 -rwx 3677224 Mar 02 2002 00:08:47 +00:00 c1200-k9w7-mx.123-8.JEC
152 -rwx 131328 Mar 02 2002 00:08:49 +00:00 5001.img
153 -rwx 131328 Mar 02 2002 00:08:51 +00:00 5101.img
154 -rwx 131328 Mar 02 2002 00:08:53 +00:00 6301.img
155 -rwx 131328 Mar 02 2002 00:08:56 +00:00 6701.img
156 -rwx 131328 Mar 02 2002 00:08:58 +00:00 6701_cal.img
157 -rwx 274 Mar 02 2002 00:08:58 +00:00 info
7741440 bytes total (2721280 bytes free)
Any ideas?
