11-08-2008 07:25 PM - edited 07-03-2021 04:45 PM
Hi fella,
I have a problem with this Cisco 1100 AP, LED Light said: Red-Green-Red
here a link @ http://www.cisco.com/en/US/docs/wireless/access_point/1100/installation/guide/110h_c6.html
I tried to obtaining IP Address from AP, no response IP Address from Windows Vista, tried 10.0.0.1 in from website address. Cannot Response.
How do I solution? I'm newbie.
11-09-2008 12:41 PM
Try reverting the AP to IOS, using the c1100-k9w7-tar.default file name method as mentioned in the link.
11-09-2008 07:29 PM
How do I put???? I don't know how to put this in AP??? Help me...
11-10-2008 01:48 AM
Read the section ;
"Using the MODE Button to Return the Access Point to Autonomous Mode " in the link in your original post.
To summarise;
Step one: Change your workstation address to 10.0.0.29/24
Step two: Rename IOS image (tar file) to c1100-k9w7-tar.default
Step three: setup tftp server
Step four: Connect AP and workstation to switch or interconnect with a crossover cable.
Step five: Turn on AP while holding down mode button for +- 20 seconds (Radio led turns red) then release mode button
Step 6: Wait until the access point reboots, as indicated by all led's turning green followed by the Status led blinking green
11-12-2008 07:12 PM
Won't work for me using AP to PC. Can you fix my AP for me?
11-13-2008 03:06 AM
Where does the recovery fail?
11-13-2008 02:32 PM
Try a crossover cable if you cannot connect to the AP with your PC. It's an 1100, right? 1100s do not support auto-MDIX.
11-14-2008 08:54 PM
Do you mean CAT5 cable? Yes. I tried it but it didn't work. I tried Ping 10.0.0.1 then no response from AP. I need my ap back to Cisco System for fix it.
12-21-2008 04:42 PM
i got Crossover cable. what i do?
11-13-2008 05:57 PM
I think it is IOS Software Someone put wrong IOS Image in it
12-21-2008 04:43 PM
Please show me how to on video.
11-30-2008 07:51 PM
I'd RECOMMENDED IOS Software NEED to add for putting wrong IOS Software then it will tell you for IOS failure, reboot for get old IOS Software back without getting problem.
11-30-2008 07:54 PM
And I tried everything. I dont have any tool (Cisco controller, many thing). I like Cisco System because it best network technology.
BUT it LOT money than all.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide