Hello,
I've configured 2 VLANs on cisco 1200 AP. One native (vlan 1) and tagged with vlan 2 tag. I created DHCP pool and i don't get IP address for encapsulated VLAN while i do for native.
My configuration:
Building configuration...
Current configuration : 2255 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret xxx
!
ip subnet-zero
ip dhcp excluded-address 10.60.129.1 10.60.129.60
ip dhcp excluded-address 192.168.1.1 192.168.1.2
!
ip dhcp pool dhcp-pool
network 10.60.129.0 255.255.255.0
default-router 10.60.129.1
!
ip dhcp pool mngmt
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
!
!
aaa new-model
!
!
aaa session-id common
!
dot11 ssid WHEP1a
vlan 1
authentication open
!
dot11 ssid mngmt
vlan 2
authentication open
!
!
!
username Cisco password xxx
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption key 1 size 40bit xxxtransmit-key
!
ssid WHEP1a
!
ssid mngmt
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2412
station-role root ap-only
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
!
interface BVI1
ip address 10.60.129.55 255.255.255.0
no ip route-cache
!
interface BVI2
ip address 192.168.1.2 255.255.255.0
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
!
end
IOS running is: C1200-K9W7-M,Version 12.3(8)JEB
Any suggestions?
Tnx for any help.
