OEAP602 - Support for APs behind NAT

[Dave Anthony David]

   Support for APs behind NAT

In the 7.2.103.0 release, you can deploy up to 3 OfficeExtend access points (OEAPs) behind a NAT device. You can deploy up to 50 FlexConnect access points (with or without Data DTLS) behind a NAT device.

            Source: http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html

I'm confused, does it mean I can't have more than 3 OEAP602s deployed in the same remote site (let say, a Hotel) with the same Public IP back to my OEAP-WLC ?

[Scott Fella]

That is correct... I believe prior to 7.2 it was only 2.

Sent from Cisco Technical Support iPhone App

[George Stefanick]

I know on 7.0 MR1 only supports 1. I learned that the hard way doing a meeting at a hotel for our staff.

One thing we did was hook up a switch to port 4 and did HREAP with 2 other aps.. Not ideal but I like to test limits ..

Sent from Cisco Technical Support iPhone App