Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
2766
Views
0
Helpful
4
Replies

On WLC, can we know health status of AP?

Go to solution
wfqk
Level 5
Level 5

‎03-09-2021 07:01 PM - edited ‎07-05-2021 01:21 PM

Hi On WLC, can we know health status of each AP? for example, CCI, ACI and second signal strength etc? Thanks

0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Leo Laohoo
Hall of Fame
Hall of Fame
In response to wfqk

‎03-09-2021 09:46 PM

  1. On the upper right-hand corner of the GUI, there is the "Home".  Click that. 
  2. Under Network Summary, go to Access Points. 
  3. Under the Access Points, choose the AP. 

View solution in original post

0 Helpful
4 Replies 4

Go to solution
Leo Laohoo
Hall of Fame
Hall of Fame

‎03-09-2021 07:31 PM

What firmware is the WLC running on?

0 Helpful

Go to solution
wfqk
Level 5
Level 5
In response to Leo Laohoo

‎03-09-2021 07:54 PM

Latest version 8.8

 

0 Helpful

Go to solution
Leo Laohoo
Hall of Fame
Hall of Fame
In response to wfqk

‎03-09-2021 09:46 PM

  1. On the upper right-hand corner of the GUI, there is the "Home".  Click that. 
  2. Under Network Summary, go to Access Points. 
  3. Under the Access Points, choose the AP. 
0 Helpful

Go to solution
wfqk
Level 5
Level 5
In response to Leo Laohoo

‎03-10-2021 07:05 PM

Thank you!

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card