Password ap

[pcfreak49]

I have a problem I know my password no longer how can you fix it

[d.friday]

Looks like you need to perform a password recovery on the AP, I don't know what model AP you are using so it's hard to provide the exact instructions.  Here is a link that may help if not can you please provide the model number

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/9215-pwrec-2.html

David

[pcfreak49]

yes no problem, I use the Cisco 800 router type of 892W wireless module ap801-k9w7-mx.152-4.JA1

[d.friday]

Ah that's a completely different reset

Try this

Remote into your router. Issue the ENABLE command "service-module wlan-ap 0 reset bootloader". The AP will reboot into ROMmon.

Then remote into your AP using the command "service-module wlan-ap 0 session" and change the filename of the running-config.

When you've done that, enter "boot" and the AP will reboot into factory default. Issue the next command "copy start run". Then go "config t" and change the password and save the config. Done.

[pcfreak49]

I have done but it's still the same

[d.friday]

hmm,  that is strange,  maybe your config file is corrupted !/?

so you can get the AP to default mode correct ?

if so try creating a basic config and saving it.

reboot  the AP and see if you can get in.

[pcfreak49]

yes I'm in AP mode service module session and now what?

[d.friday]

Glad to hear that it worked.

if you feel this helped you please don't forget to give this a rating, that way users with the same issue will know the fix

[pcfreak49]

It worked thanks for the info and links

Yours sincerely