Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
We have a site with a 5760 controller installed and we are trying to utilize a 5508 setup as an anchor controller at a remote sire for guest access. The mobility peer is setup on both ends and is up. The WLAN insterface is setup on both ends. On the ...
Got an interesting scenario. I am labbing out 802.1X authentication for wireless with a Cisco 2504 WLC along with a Windows Server 2012 r2 with AD, DHCP Server, DNS Server, Certificate Services, and NPS. I was able to make the different parts communi...
I am thinking about turning on Load Balancing on our Cisco 5508 controllers. At times...we have 40 - 50 plus clients connect to one AP. I am still researching this. Are there any gotchas that I should be aware of? This is a large school district ...
Hi,We have one WLC 5508 and LAG is enabled on it but when we connect 4 cables to a distribution switch only 3 links are sending and receiving traffic and the 4th one is up with outgoing traffic from the distribution switch to WLC but nothing incoming...
Can I join a non-cisco portable wireless router to my WLC 5505? Or I can go to another route of setting up an autonomous AP1242G and use it as a bridge to connect to the non-cisco portable wireless router? We need a portable AP that uses power via ...
Hi. I have installed two AIR-WLC2112 with mobility group configured and authentication web. I want to know if you can create user / password web authentication only in one WLC. Now, when I create a new user / password , I have to create in two WLC. ...
We have receptionists using the Guest management portal to setup accounts for visitors. They keep setting up users with long lifetimes. Is it possible to set this so they can only set a maximum of 1 day?
Hello;I have access point air-sap1602i-e-k9 and i can not access it neither gui or console.Is the ethernet interface has a default IP address?what are the correct parameters (baud rate , data bits ....etc) so i can access it through console port ?Th...
Dear All,.What all ways i can do posturing for apple devices using ISE..? I could use only AV and AS check or anything else for MAC OS ? Thanks in advance
Hi, We have several 8510 controllers and one of them needs to be configured as HA SKU for N+1 deployment. I am testing the scenario with two controllers right now, so I have the primary and the secondary controller configured as part of the same Mobi...
I planning to purchase a cisco 1570 outdoor AP which can be powered up by a UPOE switch like the WS-C3560X-24U-L switch.My question is does the 1570 AP support UPOE or do i have to get a power injector for this? From the data sheet under powering opt...
Where can I find optional lab information to configure wireless access routers.For model 871W only.
Good Day Team, I am working with a 2100 series WLC controller and 1100 series access point. I noticed that the wireless lan controller is working. Also the access point is working. The issue is that there is no internet connection on the access poin...
Hi all, Is there any doc about migration from 4402 to 2504 in ha mode?Thanks for your answers. Bye, Patrick.
Hello,We are deploying ISE and connecting to the company's WiFi using a "machine" login (active directory laptop) works fine on Windows 7 or 8 - both wired and wireless. But, here is a scenario that I can't seem to find a good answer for. All my sear...
