12-09-2013 05:57 AM - edited 07-04-2021 01:23 AM
Hi
I should know the answer to this, but my head is overloaded.
I have several devices all windows based, authenticating to wlan every few minutes, but they are not moving, they are on the same AP all the time.
But when they do move, they behave the same.
currently running 7.0.240.0 highest we can go.
Any ideas?
cheers
12-09-2013 06:45 AM
Can u check the mtu size .
Please check this post:
https://supportforums.cisco.com/thread/2026180
Regards
Sent from Cisco Technical Support iPhone App
12-10-2013 12:10 AM
HI
TCP MSS is not enabled by default.
cheers
12-10-2013 04:35 AM
Can you post the show WLAN
Could be many things: client drivers, have you tried removing the wireless profile and creating it again, maybe try a different authentication method, etc.
Sent from Cisco Technical Support iPhone App
12-10-2013 02:31 PM
Check that the session timer on the WLAN advanced tab is not set to a low value. You could just have short session times, which would explain the frequent re-authentications.
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide