11-11-2014 02:50 AM - edited 07-05-2021 01:54 AM
Hi there.
Anyone knows why im not able to erase / delete flash or .bin file when distribute images to my switches ?
I've set the option "backup current image and erase flash before distribution - but nothing seems to work.
From the console output i can see the commands PI is doing - but never the erase flash command... bug ?
Ive tried upgrade using the TAR file but it fails , using debug ip scp - message is EOF ? - using tftp it works 20 % of the time but it takes 2 hours to complete and option "insert boot command" is not not working.
------
If i use bin file it works and speed is ok, but then im not able to delete the old image.
Help
Solved! Go to Solution.
11-11-2014 02:08 PM
Filip,
Are you aware of the root access feature in Prime cmd line?
# root_enable
(set pass)
# root
Enter root password :
Starting root bash shell ...
ade #
11-11-2014 02:08 PM
Filip,
Are you aware of the root access feature in Prime cmd line?
# root_enable
(set pass)
# root
Enter root password :
Starting root bash shell ...
ade #
11-11-2014 11:27 PM
Hi Wifi.
Thanks for taking the time to reply.
Yes , ive set the password for using ssh instead of telnet , right ?
Ive set the same user and pass in GUI image management.
I am able to use ssh and scp when distributing BIN images , not TAR.
11-13-2014 12:44 AM
Hi Wifi.
I've created a new user and password in root cli and changed it in GUI and now my scp tar is working , thanks for leading me the right direction.
Strange , i did this once and it did not work for me.
Thanks Again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide