10-29-2020 04:26 PM - edited 07-05-2021 12:43 PM
I want to install PI 3.8 (express), and in the requirements, it says this;
Requirement Express Express-Plus Standard Professional
VMware Version ESXi 6.0, 6.5, or 6.7 ESXi 6.0, 6.5, or 6.7 ESXi 6.0, 6.5, or 6.7 ESXi 6.0, 6.5, or 6.7
Virtual CPUs1 4 8 16 16
Memory (DRAM) 12 GB 16 GB 16 GB 24 GB
HDD Size 300 GB 600 GB 900 GB 1.2 TB
Throughput
(Disk IOPS) 200 MB/s 200 MB/s 200 MB/s 320 MB/s
Minimum CPU
Speed 2.29 GHz 2.29 GHz 2.29 GHz 2.29 GHz
But when I install it, there is a part that requires 2.1 TB and my disk does not have enough space. (add screen disk).
I also tried installing PI (express plus) and it is the same case for the disk, this required 2.1 TB.
Is this correct or why don't you just use the 300gb for a PI (express) ????
10-29-2020 08:30 PM
i’ve done this with the same version in my lab and didn’t have problem, suggestion: can you check the MD5 hash for the image you downloaded. You can use the free program HashCalc for that.
10-29-2020 08:57 PM - edited 10-29-2020 08:59 PM
I tryded also install PI in a lab but no showed this.
Tried to turn on the PI in the vMware and shows this:
Ignition errors.
"Insufficient resources to satisfy the configured failover level for vSphere HA."
Then i think that could be the vMware (but i don´t know).
But i will try your recommendation about the hash MD5.
10-30-2020 08:53 AM
The error message you get is from the VMWare side. It's telling you that you don't have sufficient ressource on the other ESX host(s) of your VMWare deployment to run the PI VM if the current ESX host crash.
I am not a VMWare expert, but if HA is not needed for this VM, maybe you can disable the HA policy for this particular VM.
If HA is needed, then you need to make sure you have enough ressource on your ESX cluster to run all VMs if one of the server crash.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide