PocketPCs and Aironet 340 card not recognised?

[nowen]

Hiya, I have a Compaq Ipaq PocketPC 2002, the 3800 series. I have installed the Windows CE 3 drivers and everything is fine until I insert the PC card into my PC Sleeve expansion slot. Its not recognised at all, have to name it, ie PocketPC 2002 does not recognise it at all. The firmware is the latest 4.25.10.

Any ideas would be greatly appreciated as we are setting up a departmental cisco wireless system and if the PDA dont work it may have to be scrapped

regards

Nick

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[rmarosko]

It may be PocketPC 2002. I have an iPaq H3670

running WinCE 3.0.9348, and running a PCM352

card with 4.23 firmware. It works marvellously

here in our environment.

....Ron