Power adapter required for AP

[aakashojha]

The power adapter does not work for my AP. So I require a  new Power adapter for CISCO Wireless Access Point (Cisco AIR-AP-1242G-A-K9). Does the SMB Support (SMBS) cover the replacement for the adapter?

Or Can anybody tell me the correct part code so i can order it from the distis.

The details listed in the Power adapter (1242G-A-K9)  is noted below-

Model no: ADP-16PB
Input Voltage- 110-240 V AC
Amp- 13.5
Output Voltage- 48 V DC
Amp- 0.3
Scisco pin- 34-1977-03

Thanks.

[dmantill]

As per ordering guide:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6521/product_data_sheet0900aecd8031c968.html

If you have SMB i think they do process RMA depends on your contracts... and if TAC processes EITHER air-pwr-A or air-pwr-b is the same and most like you will be the B one since TAC does not longer processRMAs with with the part name air-pwr-a

Table 4. Cisco Aironet 1240AG and Aironet 1240G Power Supply Product Numbers

Product Number	Product Description
AIR-PWR-A	Power supply for the Cisco Aironet 1240AG and Aironet 1240G Series
AIR-NO-PWR-SUPPLY	Power supply not shipped

If  lost or damaged, the power supply can also be ordered as a spare  replacement part (Table 4). Spare parts do have a cost associated with  them.

Table 5. Spare Cisco Aironet 1240AG and Aironet 1240G Power Supply Product Numbers

Product Number	Product Description
AIR-PWR-B=	Power supply for the Cisco Aironet 1240AG and Aironet 1240G Series

[Vinay Sharma]

Hi Aakash,

Please mark the Question as Answered, if the provided information by Diego is correct and it helped. By doing that others can take benefit as well.

Thanks,

Vinay Sharma

Community Manager – Wireless