Re: Prevent capwap from auto rebooting due to no WLC

FIX A PC · ‎08-11-2021

What is the command to prevent the capwap from auto rebooting due to no WLC?

for wave 2+ APs?

High Performance Networking

marce1000 · ‎08-11-2021

- The question is irrelevant , if there is no WLC then a lightweight-ap can not be operational

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

FIX A PC · ‎08-11-2021

Yes i know the AP cannot be used without a conversion to mobility express unless i have a WLC. But i still have access to many configuration and CLI commands. I was just wondering if it was at all possible to increase the timeout process for discovery or disable auto reboot. On other older APs this is possible.

High Performance Networking

Rasika Nayanajith · ‎06-25-2022

I believe you referring to "debug capwap client no-reload" CLI command in IOS AP models. I do not think an equivalent is available in wave2 or new 9100 series APs.

HTH

Rasika

*** Pls rate all useful responses ***

Fred Nielsen (ePlus) · ‎06-25-2022

Not irrelevant - let's say you are trying to convert an AP to Mobility Express mode over tftp - this can take a while depending on the nature of your tftp connection.. and the auto-restart will indeed abort\interrupt it.