04-04-2013 03:25 AM - edited 07-03-2021 11:50 PM
Where are the AP groups in PI 1.3 ?
The documentation in PI 1.3 states
Step 1 Choose Configure > Controller Template Launch Pad.
Step 2 Click AP Groups or choose WLAN > AP Groups from the left sidebar menu.
AP groups in the controller itself shows the applied template names, but there are no templates ???????
Solved! Go to Solution.
04-04-2013 05:00 AM
Have you looked using classic theme and not the default lifecycle theme. Click on the root on the top right and choose classic theme. Also you might need to discover templates from the controller as they don't sync the information.
Sent from Cisco Technical Support iPhone App
04-04-2013 05:00 AM
Have you looked using classic theme and not the default lifecycle theme. Click on the root on the top right and choose classic theme. Also you might need to discover templates from the controller as they don't sync the information.
Sent from Cisco Technical Support iPhone App
04-04-2013 05:13 AM
In lifecycle theme, all the templates found in the WLC should be populated. So it depends on what theme you choose.
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/temp.html#wp1073214
Sent from Cisco Technical Support iPhone App
04-04-2013 05:45 AM
thank you, it works
04-04-2013 05:55 AM
Good to know:)
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: