Hi guys
I am having problems adding a new 2600 Aironet AP to my existing wireless infrastructure. We have a 2504 Wireless Controller with 12 Aironet 2600 AP's It's been a while since I added an access point, but I know when when previously done it was a case of just plugging in the new AP, then firmware and settings are downloaded to the new AP and its good to go (except for maybe a few settings changes/rename).
However, with this latest brand new AP (the same model as the others - 26021-E-K9) it comes on and gets a solid green light. I've let it for hours and nothing! I can see the AP showing up in DHCP so its getting a network address, but there is no sign of it in the logs on the 2504 controller.
I've been able to connect to the AP's management console via its IP address (which is something I can't do on the other APs) and I can see that it is running the same firmware version as the others - 15.2(2)JA . The controller is running 7.3.112.0 (and I can't update that, as my service agreement expired!
I'm actually wondering if I have a faulty AP, as this has never been a problem before!
Any advice/suggestions would be very much appreciated!
