10-23-2003 02:42 PM - edited 07-04-2021 09:06 AM
I have problems trying to connect a Telxon PTC 960SL that is working fine with the Access Point AP4800, but now I can´t connect to the Access Point 350.
11-17-2003 02:39 AM
I had the same problem with telxon 960 LE. To access to teh AP 350 you need:
- to use chanel 10-11-12 or 13
_ to enable: "ensure compatibility with 2Mb/sec clients"
Maybe it will work for the 960 SL.
11-17-2003 02:08 PM
You can use any channel you would like, I'd select 1, 6, or 11. you would need to enable the compatibility with the 2/mb sec clients, on the express setup page. Also you would need to set the preamble to long, the default is short on the 350.
That is on the: AP Radio: Internal --> Advanced setting. then it is the very bottom option.
11-18-2003 07:04 AM
Thank´s for the information, I already changed these values but I still have the problem trying to connect the PTC 960SL...
Would you have another suggestion ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide