Problem connecting PTC 960SL to AP350

[odette-garcia]

I have problems trying to connect a Telxon PTC 960SL that is working fine with the Access Point AP4800, but now I can´t connect to the Access Point 350.

[llesne]

I had the same problem with telxon 960 LE. To access to teh AP 350 you need:

- to use chanel 10-11-12 or 13

_ to enable: "ensure compatibility with 2Mb/sec clients"

Maybe it will work for the 960 SL.

[adamt]

You can use any channel you would like, I'd select 1, 6, or 11. you would need to enable the compatibility with the 2/mb sec clients, on the express setup page. Also you would need to set the preamble to long, the default is short on the 350.

That is on the: AP Radio: Internal --> Advanced setting. then it is the very bottom option.

[odette-garcia]

Thank´s for the information, I already changed these values but I still have the problem trying to connect the PTC 960SL...

Would you have another suggestion ?